Adjusting The Spindle Speed; Setting The Direction Of Spindle Rotation - Holzmann ED400FD Instrucciones De Servicio

After replacing the belt, tension the belt and refit the cover!

19.4.3 Adjusting the Spindle Speed

The speed (low/high) within a speed range is selected by means of the speed
controller (D).
The current speed is displayed on the speed display (C).

19.4.4 Setting the Direction of Spindle Rotation

Before changing the direction of rotation, always wait for the machine to come to a
standstill, otherwise the machine may be damaged!
Switch the rotating direction switch (1) to the position ˝F˝ for
counterclockwise spindle operation and to the position ˝R˝ for clockwise
spindle operation.
The position ˝O˝ is set to idle.
HOLZMANN MASCHINEN GmbH
 Loosen the marked hexagon socket screw (left behind
drive wheel) and loosen the belt (C).
 Place the V-belt C on the corresponding belt pulleys.
 There are 2 positions (see illustration on the left): A and B
 Position A (outer pulleys): 50-1.250 min-1
 Position B (inner pulleys): 100-2.500 min-1
NOTICE
www.holzmann-maschinen.at
OPERATION
51
ED400FD | ED400FDDIG