Installation Of The Hob In The Worktop Cut-Out - bora PG 11-000 Instrucciones De Instalación, Operación Y Mantenimiento

... Installation

Installation of the hob in the worktop cut-out

The distance between the cut-out edge and the rear and side walls must be
minimum 65 mm.
■ Chimney cooker hoods are to be installed in accordance with the installation
instructions of the hood, albeit with minimum clearance of 650 mm from the
hob.
For installation in built-in kitchen units, ensure that the plastic or veneer of the
■
units is applied with heat-resistant adhesive as it might otherwise become
loose or deformed, especially at the edges.
Seal the exposed cut-out edge with a sealant such as
■
8
370
346
silicone.