Above Floor Cleaning - Bissell POWERTRAK 1808 Serie Guia Del Usuario

Install Febreze® Filter
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and that
the filter is in place. DO NOT operate your vacuum without the filter.
1
Press top of dirt tank
to release it from the
vacuum base.
NOTE: Your vacuum comes with a standard foam filter (yellow) located in the top of of the
dirt tank. A separate Febreze® foam filter (black) may also be packed in the box. Both are
washable. Over time, the Febreze® filter will begin to lose scent after use and washing.
Power On & Settings
1
Turn the dial on the foot of the vacuum to desired
setting. If dial is difficult to turn, tilt vacuum back.

Above Floor Cleaning

1
Febreze® and related trademarks are owned by the Procter & Gamble Company,
Cincinnati, Ohio and used under license by BISSELL Homecare, Inc.
6
www.BISSELL.com
2
To access the filter, twist
the top of tank counter-
clockwise to unlock and
reveal filter.
Bare Floor Setting -
For bare floors or low
pile carpet.
High Carpet Setting -
For high pile and most
shag carpet.
Pull hose up and out of
vacuum base to attach
your desired tool.
*
*Included separately
3
Replace standard yellow
foam filter with Febreze®
black foam filter to freshen
as you vacuum.
2
Press down once on the red ON/
OFF pedal located on the lower
back of the vacuum to turn ON.
Press down again to turn OFF.
2
For extended reach, attach the
extension wand to the hose first
and then your desired tool.