Bissell POWERTRAK 1808 Serie Guia Del Usuario página 7

Maintenance: Empty Dirt Tank
WARNING
To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
Empty once tank is full.
Maintenance: Clean Tank & Cyclone
1
Remove the dirt
tank and twist
its top counter-
clockwise to
unlock and pull
up to separate.
3
Align tabs on Cyclone
assembly with tank to
replace.
NOTE: Let parts dry completely before returning them to vacuum for use.
2
Press the release button at
the top of the dirt tank to
remove it from the vacuum.
2
4
Place the top back on
the dirt container by
aligning the tab, then
twist clockwise to lock.
3
Hold dirt tank over a trash
container and press lid release
button to empty. Close lid and
return tank to vacuum base.
Grab the top of the Cyclone
assembly to remove. Clean
with warm water and mild
detergent. Wipe inside of
tank with a damp cloth.
Do not reassemble until
completely dry.
5
click
Return the fully assembled
tank to the vacuum base
and press firmly until you
hear a "click".
www.BISSELL.com
7