Electronic Electric Fryers; Cleaning The Interior; Main Components; Gas Fryers - Mareno NF74G Serie Instrucciones Para Instalación, Uso Y Mantenimiento

• Re-assemble all parts. For assembly, proceed in reverse or-
der.
19.4

ELECTRONIC ELECTRIC FRYERS

Replacing the heating element
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the temperature sensor and safety thermostat.
• Drain off all the oil from the well
• Open the door.
• Remove the control panel.
• Unscrew the locking nut on the heating element flange.
• Remove and replace the component.
• Change the sensor/bulb sealing O-ring in the well.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.

20 CLEANING THE INTERIOR

• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.

21 MAIN COMPONENTS

21.1

GAS FRYERS

• Gas valve
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Piezoelectric ignition
• Safety thermostat
21.2

ELECTRIC FRYERS

• Safety thermostat
• Working thermostat
• Heating element
21.3

ELECTRONIC GAS FRYERS

• Gas valve
• Main burner
• Pilot burner
• Thermocouple
• Igniter
• Digital temperature control thermostat.
• Safety thermostat
• Electronic igniter
21.4 ELECTRONIC ELECTRIC FRYERS
• Digital temperature control thermostat.
• Safety thermostat
• Heating element
49