Zeiss VICTORY HT Modo De Empleo página 7

instructions for use
ZeISS products are famous for outstanding optical performance, precision workmanship and a
long service life.
Please observe the following instructions for use in order to obtain the best from your riflescope
and to ensure that it remains your constant companion for many years to come.
information for your safety
battery disposal
Batteries do not belong in household rubbish!
Please use a recycling facility in your area to dispose of used batteries.
Please only recycle discharged batteries.
As a rule, batteries are discharged if the device being run
� shuts off and signals "Battery empty".
� no longer functions properly after extended use of the batteries.
environmental influences
� Do not under any circumstances look through the riflescope at the sun or laser light sources!
Serious eye injury may otherwise result.
� Never leave the device in the sun for extended periods without the protective lens cap. The
objective lens and eyepiece can function as a burning glass and damage the interior components.
� Avoid touching the metal surface after exposure to sunlight or cold.
Danger of swallowing
Do not leave the batteries and removable exterior parts within reach of children (danger of
swallowing).
Function
� Before working on the gun-mounted riflescope, always check to ensure that the weapon is not
loaded.
� Be sure to leave sufficient eye relief in the mounted position to prevent
injuries.
� Please make sure that the riflescope is functioning properly before use.
� Look through the lens to ensure it provides a clear, undisturbed image.
� It may no longer be properly adjusted due to rough handling.
� Check correct setting of the reticle by test shooting.
8
Table of contents
Description of the components
Scope of supply
Focusing the reticle
Change of magnification
Inserting/removing the battery
Reticle illumination
Basic mounting setting
Adjusting the ZeISS VICTORY HT riflescope to the weapon
Seal integrity
Reticle
Reticle retrofitting
Care and maintenance
Replacement parts for the ZeISS VICTORY HT
Accessories for the ZeISS VICTORY HT
Technical data
Guarantee
Description of components
1 Reticle adjustment (elevation)
2 Reticle adjustment protective lens cap (windage)
3 eyepiece mount rubber ring
4 Dioptre compensation for reticle
5 Magnification changer
6 Adjustment knob for reticle adjustment (elevation)
7 Adjustment knob for reticle adjustment (windage)
8 Zero mark of the graduated ring
9 Index point
10 Battery cover
11 Reticle illumination adjustment knob
9
9
10
10
10
11
11
11
11
12
12
12
13
13
13
14
106