Nogueira PTN-1000 G3 Manual De Instrucciones página 106

4. Preparation
Remove the 2 bolts (E) and the cover (F);
1.
Remove the cover (F)
2.
Remove the cutting gears (G);
3.
Remove the box (H);
4.
Remove the 2 bolts (L);
5.
Remove the bearing support "shackle" (T);
6.
Remove the 4 bolts (J);
7.
Pull the support (K) upwards, removing it
8.
from the machine;
Remove the pin (S) and remove the shaft
9.
(U);
Replace the shaft (U) with the splined
10.
shaft (V);
NOTE!
The splined shaft (V) is in the kit
of parts that comes with the platform.
30
Instructions Manual