Setting Up The Weighing Platform - Minebea Intec IS X Serie Advertencias De Instalación Y Medidas De Seguridad

R L
R
L
L R

Setting Up the Weighing Platform

Model IS06BBE-SX
§ Position the components listed below in the order given:
– Dust cover
! When using the dust cover in a hazardous area/location, make sure the weighing
platform is set up and operated in such a manner that the risk of ignition due to static
electricity is avoided. See also the instructions on the dust cover.
– Place the shield ring on the weighing platform and turn it counterclockwise until it
is seated firmly.
– Pan support
– Load plate
– Glass draft shield
– Draft shield cover
Models IS2CCE-SX, IS6CCE-SX
§ Position the components listed below in the order given:
– Dust cover (remove plastic from adhesive surface)
When using the dust cover in a hazardous area/location, make sure the weighing
!
platform is set up and operated in such a manner that the risk of ignition due to static
electricity is avoided. See also the instructions on the dust cover.
– Pan draft shield (depending on platform model)
– Load plate
Models IS6CCE-SX, IS12CCE-SX
– Dust cover
– Load plate
Leveling the weighing platform using the level indicator:
Models IS06BBE-SX, IS2CCE-SX, IS6CCE-HX, IS6CCE-SX, IS12CCE-SX
At the place of installation, level the weighing platform using the leveling feet so that
the air bubble is centered within the circle on the level indicator. Check to ensure that
all four feet rest securely on the work surface. Adjust only the 2 front feet to level the
weighing platform.
– Retract the 2 rear feet
– Turn the 2 front feet until the air bubble is centered in the level indicator.
– Extend the 2 rear feet until they rest on the work surface.
Anti-theft Locking Device
– Use the lug located on the back of the weighing platform to attach an anti-theft locking
device (models IS06BBE-SX, IS2CCE-SX, IS6CCE-HX, IS6CCE-SX, IS12CCE-SX only).
For example, attach a lock, chain or steel cable to secure the weighing platform.
7
IS...-X Models