Service Data - Frontier BG1000 Manual Del Operador

SERVICE DATA

SKILL AND TRAINING REQUIRED FOR SERVICING
This Service Manual is designed for technicians who have the necessary mechanical and electrical
knowledge and skills to reliably test and repair the BG1000 Bedknife Grinder. For those without the background,
service can be arranged through your local distributor.
This section presumes that you are already familiar with the normal operation of the Grinder. If not, you
should read the front of this manual, or do the servicing in conjunction with someone who is familiar with its
operation.
Persons without the necessary knowledge and skills should not remove the control box cover or attempt any
internal troubleshooting, adjustments, or parts replacement.
If you have questions not answered in this manual, please call your distributor. They will contact the
manufacturer if necessary.
TORQUE REQUIREMENTS
Throughout this manual we refer to torque
requirements as "firmly tighten" or the like. For more
specific torque values, refer to the information
below.
Bolts Going Into a Nut, or Into a Thread Hole in
Steel.
Refer to the table at the right.
Bolts Going Into a Thread Hole In Aluminum
Use the Grade 2 values in the table at the right.
Socket-Head Screws Going Into a Nut or Steel
Use the Grade 8 values in the table at the right.
Machine Screws
No. 6 screws: 11 in.- lbs (0.125kg - m)
No. 8 screws: 20 in. - lbs (0.23 kg - m)
No. 10 screws: 32 in. - lbs (0.37 kg - m)
GRADE 2
SMOOTH
1/4 In.
thread (0.8 kg-m)
5/16 In.
thread (1.5 kg-m)
3/8 In.
thread (2.6 kg-m)
7/16 In.
thread (4.1 kg-m)
1/2 In.
thread (6.2 kg-m)
7
GRADE 5 GRADE 8
3 MARKS 6 MARKS
HEAD on HEAD on HEAD
6 ft-lbs 9 ft-lbs 13 ft-lbs
(1.25 kg-m) (1.8 kg-m)
11 ft-lbs 18 ft-lbs 28 ft-lbs
(2.5 kg-m) (3.9 kg-m)
19 ft-lbs 31 ft-lbs 46 ft-lbs
(4.3 kg-m) (6.4 kg-m)
30 ft-lbs 50 ft-lbs 75 ft-lbs
(6.9 kg-m) (10.4 kg-m)
45 ft-lbs 75 ft-lbs 115 ft-lbs
(10.4 kg-m) (15.9 kg-m)