Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
Electrical Requirements:
• The unit is designed for 115 Volts, 50/60 Hertz, 15 Amps
• The unit requires a grounded 115 Volt 15 Amp circuit for operation.
DO NOT use extension cords. Voltage drop due to long cords or small gauge wire may
cause this machine to malfunction.
IMPORTANT GROUNDING INSTRUCTIONS
In case of a malfunction or breakdown, grounding reduces the risk of electrical shock by providing a
path of least resistance for electrical current.
This grinder has an electrical cord with an equipment grounding conductor and a grounding plug.
The plug must be plugged into a matching outlet that is properly installed and grounded according
to all local or other appropriate electrical codes and ordinances.
Before plugging in the Grinder, make sure it will be connected to a supply circuit protected by a
properly-sized circuit breaker or fuse.
Never modify the plug provided with the machine--if it won't fit the outlet, have a proper outlet and
circuit installed by a qualified electrician.
ALWAYS PROVIDE A PROPER ELECTRICAL GROUND FOR YOUR
MACHINE. AN IMPROPER CONNECTION CAN CAUSE A DANGEROUS
ELECTRICAL SHOCK. IF YOU ARE UNSURE OF THE PROPER
ELECTRICAL GROUNDING PROCEDURE, CONTACT A QUALIFIED
ELECTRICIAN.
Inspect Grinding Wheel:
The bedknife grinder has been supplied with a medium grit wheel Part #5NT3700411. With proper
use and care, this wheel will provide maximum grinding capability, accuracy, and safety. Prior to
starting the machine, visually inspect the wheel for possible damage in shipment.
If the grinding wheel appears to be damaged, DO NOT start the grinder.
The BG1000 is now fully assembled and ready for the review of the operating instructions.
Always wear proper safety eyewear, and respirator equipment when
operating the BG1000.
Before operating this grinder, read the Operating Instructions.
9
Publicidad
