Frontier BG1000 Manual Del Operador página 32

WIRING INFORMATION
To convert this grinder to operate on 220 V,
50/60 Hz phase current, cut the plug off from the
cord and replace it with the appropriate plug for
your locality. For plug and circuit breaker sizing,
see motor nameplate ratings.
USE A QUALIFIED
ELECTRICIAN TO
MAKE THE
CHANGE TO 220V.
NOTE: This motor will operate correctly on
60 Hz or 50 Hz power.
CONVERTING MOTOR TO 220 VAC
To convert the motor to 220 VAC move the
following wires:
1. Move the BLUE motor wire (not the wire
from the plug.) from termial 1 to terminal 6.
2. Move the YELLOW motor wire from
termial 5 to terminal 1.
3. Move the ORANGE motor wire from
termial 4 to terminal 5.
YELLOW
(MOTOR WIRE)
ORANGE
(MOTOR WIRE)
ORANGE
(MOTOR WIRE)
YELLOW
(MOTOR WIRE)
10
WIRING FOR 115 VAC
WIRING FOR 220 VAC
BLUE
(MOTOR WIRE)
BLACK OR
BROWN
LITE BLUE
OR WHITE
BLUE
(MOTOR WIRE)
BLACK OR
BROWN
LITE BLUE
OR WHITE