Icemaker; Icemaker M - General Electric IM-6D Instrucciones Para Instalación

INSTALL THE ICEMAKER FILL CUP
5
into the icemaker as shown.
PLUG IN THE ICEMAKER
6
Holding the icemaker in place, insert the power
cord plug into the socket, making sure that the
prongs and holes are matched. Press the plug
firmly into the socket. Lock the plug in place by
clipping the restraints onto each side of the plug.
Make sure the restraints click into place.
MOUNT THE ICEMAKER
7
fits in the fill cup opening
on the two mounting screws
Make sure:
The power cord is still firmly in the socket.
make sure the fill tube has not been pushed out of
the back of the refrigerator.)
uppermost position of the mounting slots.
THEN TIGHTEN THE
ICEMAKER MOUNTING
SCREWS SECURELY.
49-60704-2
Installation Instructions
13
tube extension
10
A
C
INSTALL THE ICE BUCKET
8
Put the ice bucket

icemaker.

Make sure the icemaker
power switch is set to
OFF.
ATTACH WARRANTY LABEL
9
A label
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
KEEP THIS MANUAL
10
The warranty for the icemaker is printed in
this manual. Keep this manual with your
Refrigerator Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
9
11