Installation Instructions - General Electric IM-6D Instrucciones Para Instalación

Installation
Instructions
GEAppliances.com.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT –
•
local inspector's use.
IMPORTANT –
•
and ordinances.
Note to Installer –
•
instructions with the Consumer.
Note to Consumer –
•
for future reference.
• Skill level
basic mechanical skills.
• Completion time – 20–60 minutes
• Proper installation is the responsibility of the
installer.
• Product failure due to improper installation is not
covered under the Warranty.
WHICH INSTRUCTIONS SHOULD
YOU FOLLOW?
There is a label on the back of the refrigerator that
L M N Q R S T U V
Pages 8–44
The actual installation of the icemaker will depend on
which model refrigerator you have.
49-60704-2
1.800.GE.CARES or visit our Website at:
1.800.561.3344 or visit our Website at: www.geappliances.ca
Save these instructions for
Observe all governing codes
Be sure to leave these
Keep these instructions
W
or
IM-6D Icemaker Kit
ARE YOU REPLACING AN
ICEMAKER WITH THIS KIT?
tube assembly that come with this kit, even though
your refrigerator may already have them installed.
The old valve will not allow enough water through to
fill the icemaker properly and will cause damage.
DAMAGE – SHIPMENT/
INSTALLATION
to the store in which it was bought for repair or
replacement.
replacement is the responsibility of the customer.
the customer), repair or replacement must be made
by arrangement between customer and installer.
5