General Electric IM-6D Instrucciones Para Instalación página 23

INSTALL THE ICEMAKER FILL CUP
4
icemaker fill cup
into the icemaker as shown.
PLUG IN THE ICEMAKER
5
Holding the icemaker in place, insert the icemaker
power cord plug into the socket on the rear wall,
making sure the prongs and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping the restraints onto each side of
the plug. Make sure the restraints click into place.
49-60704-2
Installation Instructions
13
MOUNT THE ICEMAKER
6
cup
mounting screws
Make sure:
The power cord is still firmly in the socket.
fill tube
refrigerator to make sure the fill tube has not been
pushed out of the back of the refrigerator).
THEN TIGHTEN THE ICEMAKER MOUNTING
SCREWS SECURELY.
C
INSTALL THE ICE BUCKET
7
Place the ice bucket
OFF.
ATTACH WARRANTY LABEL
8
A label
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
KEEP THIS MANUAL
9
The warranty for the icemaker is printed in
this manual. Keep this manual with your
Refrigerator Owner's Manual.
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
fill tube fill
19
E
9
23