General Electric IM-6D Instrucciones Para Instalación página 16

WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS M
of the refrigerator—
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING
To reduce the risk of
electric shock or injury during installation,
you must first unplug the refrigerator
before proceeding.
TOOLS YOU WILL NEED
Flat blade and Phillips
screwdrivers
REMOVE THE COVER
1
to remove the compressor compartment access
attach the cover to the back of the refrigerator
case.
Be sure to save the screws as the access cover
must be reinstalled later to ensure your refrigerator
will function properly.
WARNING
To reduce the risk of death or
electric shock, you must follow these
instructions:
Unplug the refrigerator before removing any
panels.
Do not damage any wiring while the panel is
removed.
Replace all parts and panels before plugging
the refrigerator back in.
16
Installation Instructions
L M N Q R S T U V
Pliers Sharp knife
or W
ATTACH THE WATER VALVE
2
Locate the female connector plug. Plug the female
connector
water valve
terminal.
Fasten the water valve to the cabinet by driving
the hex-head screw
in the cabinet leg.
4
C
15
49-60704-2