Ec Declaration Of Conformity - Gardol GMSH 40+ Manual De Instrucciones

DECLARATION OF CONFORMITY

EC Declaration of Conformity

(Applies to Europe only)
Aktiebolaget Partner, SE-433 81, Göteborg, Sweden, tel: +46-36-146500, declares
under sole responsibility that the chain saws for forest service Gardol GMSH 40+
from 2016's serial numbers and onwards (the year is clearly stated in plain text on
the type plate with subsequent serial number), are in conformity with the
requirements of the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of December 14, 2005 "relating to the noise emissions in the environment"
2005/88/EC
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
Conformity assessment procedure according to Annex V of the above directive has
been used.
For information relating to noise emissions, see the Technical data chapter. The
following standards have been applied:
EN ISO 11681-1:2011, EN ISO 14982:2009, ISO 12100:2010, CISPR 12:2013
Notified body: TÜV Rheinland LGA Products GmbH, Tillystrasse 2, D-90431
Nuernberg, Germany, 0197, has carried out EC type examination in accordance
with the machinery directive's (2006/42/EC) article 12, point 3b. The certificate for
EC type examination in accordance with annex IX, has the number: The certificates
for EC type examination in accordance with annex IX, have the numbers: BM
50362273
The supplied chain saw conforms to the example that underwent EC type
examination.
Changzhou, China. Aug 29 2016
John Thompson, Product and Marketing director EUAP.
(Authorized representative for Aktiebolaget Partner and responsible for technical
documentation.)
-- 15 --