Polytropic PAC 16 Manual De Instrucciones página 49

Error messages
- E0
- E1
- LO
(One of the probes measures a temperature lower than AL)
- HI
- EE
If alarms LO or HI are displayed, it means that the heat pump is working out of
its limits
These units are designed to operate with air temperatures between 10° C and
35° C.
When the compressor is stopped, it takes two minutes to restart.
On PAC models, all alarms are automatically reset. If an alarm message
stays, it means that the problem is a persistent one
Probe 1 error (water temperature)
Probe 2 error (defrost temperature)
Low temperature alarm
High temperature alarm
(One of the probes measures a temperature higher than AH)
Reading memory error
- 49 -