Installation Instructions - Festo CPX Serie Instrucciones Para El Usuario

3

Installation instructions

Warning
Before carrying out installation and maintenance work,
switch off the following:
if applicable, the compressed air supply
the operating voltage supply for the electronics/
sensors
the load voltage supply for the outputs/valves.
3.1 Installation/dismantling
The multi−axis interface CPX−CMXX is mounted in a
manifold sub−base of the CPX terminal.
1
Screws, TORX T10
tightening torque
0.9 1.1 Nm
2
CPX−CMXX
3
Contact rails
4
Manifold sub−base
(as desired, here as
an example without
supply)
18 Festo P.BE−K−CPX−CMXX 0810a English
1
2
3
4