Festo CPX Serie Instrucciones Para El Usuario página 25

3.6 Power supply of the CPX−CMXX
The power supply for the CPX−CMXX is provided via the
manifold sub−base.
The CPX−CMXX is supplied via the operating voltage for
the electronics and sensors.
The load voltage supply for the valves and digital
outputs is not required.
The CPX−CMXX can therefore be combined with all
manifold sub−bases.
Manifold sub−base without supply
Manifold sub−base with system supply if the space
below the modules to the left of the CPX−CMXX is not
sufficient for the system supply
Manifold sub−base with additional supply if the
module to the right of the CPX−CMXX requires an
additional supply, but the space is not sufficient for the
additional supply.
Please note
Further information on the power supply and the
manifold sub−bases can be found in the CPX system
manual P.BE−CPX−SYS−...
Festo P.BE−K−CPX−CMXX 0810a English 25