Publicidad
Speaker Installation
the plinth for proper stability.
You may attach the plinth during the unpacking process, following
attach it after the product has been fully unpacked, by covering
a suitable support such as a table with a cloth and laying the
speaker on its side with the base of the cabinet overhanging the
support. Align the plinth with its attachment holes in the underside
of the cabinet, ensuring that the arrow on the underside of the
plinth points forwards. Secure the plinth using the screws and
washers supplied. Fit the shakeproof washers between the plain
washers and the screw heads. Tighten the screws using the
Allen key supplied.
6
surface. Initially, screw the lock nuts onto the spikes enough to
threaded inserts in the plinth. If the cabinet rocks when placed
the spike feet after speaker positioning has been optimised.
Fit the rubber feet and level the cabinet in the same manner as
with the spike feet.
Publicidad
