1.
You have chosen a CrosbyIP lifting clamp.
EN
06
If CrosbyIP clamps are maintained as described in this manual, they will remain in
optimum condition. We believe that CrosbyIP clamps are the most reliable lifting
clamps available. But using reliable tools does not automatically mean that practices
are reliable. The people who work with clamps play an equally important role in reliable
lifting. Ensure that everyone who works with CrosbyIP lifting clamps has been
instructed in the proper application of the clamps.
Inter Product BV provides a 10 year warranty for its clamps. In order to benefit from this
warranty programme and for more details on maintenance procedures, please consult
www.crosbyip.com/warranty for more information.
Please read and understand these instructions before using the lifting clamp.
It is not permitted
to stay in the
1.1
danger zone of
the load.
„
No changes may
be made to
„
CrosbyIP clamps.
Never straighten,
attempt to bend
or heat treat
„
parts.
Clamps suited for
stainless steel,
must be used
only for handling
stainless steel, to
avoid contact
corrosion.
Copyright © 2016 The Crosby Group LLC. All Rights Reserved.
General
Safety precautions
Proper instruction for the personnel is of vital importance. This will contribute to
maximum reliability in the working environment.
IPBK clamps may be applied per piece, per set or several at the same time for the
lifting of steel beams where the web must be kept in a horizontal position
(H-position). Ensure that each clamp receives its equal share of the load. When
using more than two clamps an equalizing beam is recommended.
To manifest a safe and secure grip of the lifting clamp on the flange, the A-and
B-measurements of the flange must at least contain the following values (with
certain measurements of A and B, only the lower pivot can be in full contact with
the flange of the beam).