DJO ARTROMOT-E2 Instrucciones De Uso página 77

Note!
• If a pause has been programmed, the
carriage will stop for the pause each
time the maximum stretching value is
attained.
• Enabling the stretching in flexion func-
tion automatically disables motor B.
The only movement performed is
extension/flexion.
• It is not possible to combine a second
stretching function with the special
function "stretching in extension".
• During operation, the display will
show the symbol
left-hand corner.
n Stretching in pronation
With the special "stretching in pronation"
function the joint will be gently stretched
in the pronation direction. Only the pro-
nation/supination movement is treated
here. Motor A is automatically disabled.
The position of motor A cannot be
changed once this special function has
been activated.
Starting at the middle position the car-
riage will first move to the programmed
supination position and then to the pro-
grammed pronation position.
Subsequently the carriage reverses 5 °
towards supination and then moves very
slowly back to the programmed pronation
value (symbol: ). Subsequently the
carriage attempts to attain another 5 °
at an even slower speed (symbol:
If a high resistance toward the additional
5 ° is sensed, the reverse on load function
is automatically activated and the car-
riage moves in the opposite direction.
This stretch cycle is repeated ten times.
After that the carriage moves to the pro-
grammed maximum supination position
and restarts the stretching in pronation
cycle.
This sequence can be repeated as often
as needed. You can stop treatment with
the STOP key; after the programmed
therapy duration, it will stop automati cally.
Default: disabled
• If a pause has been programmed, the
• Enabling the stretching in pronation
• It is not possible to combine a second
• During operation, the display will
in the upper,
n Stretching in supination
).
72
Note!
carriage will stop for the pause each
time the maximum stretching value is
attained.
function automatically disables
motor A. The only movement
performed is pronation/supination.
stretching function with the special
function "stretching in pronation".
show the symbol
left-hand corner.
With the special "stretching in supination"
function the joint will be gently stretched
in the supination direction. Only the
pronation/supination movement is
treated here. Motor A is automatically
disabled. The position of motor A cannot
be changed once this special function
has been activated.
Starting at the middle position the car-
riage will first move to the programmed
pronation position and then to the
programmed supination position.
Subsequently the carriage reverses 5 °
towards pronation and then moves very
slowly back to the programmed supina-
tion value (symbol: ). Subsequently
the carriage attempts to attain another
5 ° at an even slower speed (symbol:
If a high resistance toward the additional
5 ° is sensed, the reverse on load function
is automatically activated and the car-
riage moves in the opposite direction.
This stretch cycle is repeated ten times.
After that the carriage moves to the
programmed maximum pronation
position and restarts the stretching in
supination cycle.
This sequence can be repeated as often
as needed. You can stop treatment with
the STOP key; after the programmed
therapy duration, it will stop automati -
cally.
Default: disabled
in the upper,
).