Dab Information; Prune (Remove Stations That Are Listed But Not Available); Dynamic Range Compression (Drc); Scan For A Station In Fm Mode - SOUNDMASTER DAB970 Manual Del Usario

DAB970 / English Instruction Manual

DAB Information

While a station is playing, the screen shows the station name and DLS (Dynamic Label
Segment) information broadcast by the station such as program name, track title and contact
details. Long DLS info, over 16 characters scrolls a cross.
Each time you press the "INFO" button, the next set of information is displayed, cycling through:
DLS text, DL Plus information (this is only displayed if broadcast by the station), signal strength,
program type, ensemble name, channel number/frequency, signal error rate, bit rate, DAB
variant, time and date.
Note: DL Plus presents additional information that can be broadcast by stations and stored
temporarily on your radio. To return to the default "Now playing" screen at any time, press and
hold the "INFO" button.

Prune (remove stations that are listed but not available)

Press the "MENU" button, select the function "Prune Invalid" and press the "OK" button to
confirm.
This removes all invalid stations, indicated in the station list with a "?" in front of the station
name.

Dynamic range compression (DRC)

This function reduces the difference between the loudest and quietest audio being broadcast.
Effectively, this makes quiet sounds comparatively louder, and loud sounds comparatively
quieter.
Note: DRC only works if it is enabled by the broadcaster for a specific station
Change the DRC setting
1. Press the "MENU" button on the remote control or on the unit
2. Select "DRC" and press "OK" to confirm.
3. Select one of the available options: DRC off | low | high .
FM
FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data
System) information about the station and show (where broadcast).
Press repeatedly the " " button on the unit or the "DAB" button on the remote control until "FM"
is displayed to select the FM function.

Scan for a station in FM mode

Automatic scan
Press the "INTRO/AMS" button on the remote control. The unit scans up through the FM band
frequencies, showing the current frequency on the screen display. The found radio stations will
be stored in the station list.
Manual scan
Press the " / " buttons on the remote control or unit to tune manually in 50 kHz steps.

Presets

The unit has 40 preset memories for FM, which works in the same way as DAB mode presets.
8