Remote Control operation range
Point the remote control at the unit no more than 5 meters from the remote
control sensor and within 60º horizontally and 20º vertically of the front of the
unit. The operating distance may vary depending on the brightness of the
room.
NOTE:
-
Make sure that there is no obstacle between the remote sensor of the
unit and remote control. If you install the unit on a TV stand, etc., the
remote control range may decrease depending on the thickness or color
of the glass of the TV stand.
-
Do not expose the infrared remote sensor to direct sunlight or other
strong light, such as inverter fluorescent light.
Content of delivery
Main Unit
Instruction Manual
2 x AAA Batteries
AC power connection
Caution:
Risk of product damage! Ensure that the power supply voltage
corresponds to the voltage printed on the rating label of the AC
adapter.
Before connecting the AC power cable, ensure that you have
completed all other connections.
Connect the small end of AC socket at the back of unit and
insert the plug of the AC power cable into a standard AC wall
outlet.
Be sure to unplug the power cable from the outlet when the
system is not in use for an extended period of time.
The MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
ERP power management
The unit will turn off automatically after 20 minutes in standby mode if there is no audio
signal. To turn on the unit again press the " " button.
INSTALLATION
Remote Control
Power Adaptor
Antenna
5
DAB970 / English Instruction Manual