Kohler K-45209 Guia De Instalacion página 10

Supply Adapter
Mounting Collar
2" (51 mm)
3. Mark the Mounting Hole Locations
NOTE: The upper mounting collar must be centered on the supply
adapter. The distance between the upper and lower mounting collar
centers should be 18" (457 mm) or 27" (686 mm) depending on the
length of your shower column.
Center the mounting collar on the supply adapter. Mark the left
and right mounting holes.
For K-45209/K-45210/K-45386/K-45387 only: From the center of
the supply adapter, measure down 27" (686 mm) and mark the
horizontal measurement with a pencil.
For K-45211/K-45212/K-45388/K-45389 only: From the center of
the supply adapter, measure down 18" (457 mm) and mark the
horizontal measurement with a pencil.
Center the mounting collar on the horizontal line. Measure and
mark the left and right mounting holes. Ensure the upper and
lower mounting hole locations are level and plumb to one
another.
Do not drill mounting holes until instructed to do so.
1184491-2-A
K-45209, K-45210,
K-45386, K-45387
27" (686 mm)
K-45211, K-45212,
K-45388, K-45389
18" (457 mm)
Mounting Collar
10 Kohler Co.