Changing Channels; Adjusting The Volume; Adjusting The Picture - Dynex DX-LCD42HD-09 Guia Del Usuario

Using your TV
2 Press or to select Channel, then press . The Channel
menu opens.
Picture Sound
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Select
3 Press or to highlight Show/Hide, then press
The channel list opens.
Picture Sound
No. Program Name
1-2 Sencore
2-0
2-1 WGBH-SD
2-2 PBS-HD
2-10 WGBH-Dx
6-0
7-0
11-1 MBC DTV
12-0
14-0
Select
4 Press or to highlight the channel you want to delete, then
press ENTER to mark the channel. The check mark disappears if
the channel is deleted. The check mark appears if you add back
the channel.
Note: If the list has more than one page, press
the pages.
5 Press EXIT to close the menu.

Changing channels

Some digital channels may have sub-channels. The main digital
channel broadcasts the program. A sub-channel may broadcast a
variety of information depending on the broadcaster. For example, a
sub-channel may broadcast a second language, weather forecast, or
advertising.
To change channels:
• Press CH+ or CH– to tune to the next or previous channel in the
channel list.
• Press the number buttons for the channel you want, then press
ENTER to tune to the channel immediately or wait a few seconds
for the channel to change automatically.
If you want to tune to a digital sub-channel, press the number
buttons for the main channel, press , then press the number
button for the sub-channel. For example, to tune to
sub-channel 3 of main channel 8, press 8, press , then press 3.
Button presses must be within two seconds of each other.
• Press RECALL to tune to the last viewed channel.
• Press CH.LIST to open the channel list, press or to highlight
a channel, then press ENTER.
• Press FAVORITE to open the favorite list, press or
highlight a channel, then press ENTER.
Time Setup Lock Channel
Air
2-1
WGBH-SD
Good
:
Move
Exit
MENU
or ENTER.
Time Setup Lock Channel
Show
Next
Move
Exit
MENU
or to scroll through

Adjusting the volume

To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the volume.
• Press MUTE to turn off the sound. Press this button again to turn
the sound back on.

Adjusting the picture

To adjust the picture:
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Mode
2 Press
opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Mode
3 Press or to select an option, then press or to adjust the
option. You can select:
• Picture mode—Selects the picture mode. You can select
Standard (standard picture), Dynamic (bright, vivid
picture), Soft (finely detailed picture), or Personal
(customized picture). You can also press PICTURE to select
the picture mode.
• Contrast—Adjusts the contrast.
• Brightness—Adjusts the brightness.
• Color—Adjusts the color saturation.
• Tint—Adjusts the image tint.
• Sharpness—Adjusts the sharpness.
• Color Mode—Selects the color temperature. You can select
Warm (enhances "hotter" colors such as red), Cool (softens
the colors and adds more blue), or Normal (does not adjust
the colors).
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
to
Sound Time Setup Lock
Standard
Cool
Select Move
MENU
or to select Picture, then press . The Picture menu
Sound Time Setup Lock
Standard
Cool
Select Move
MENU
15
Channel
50
50
50
0
50
Exit
Channel
50
50
50
0
50
Exit