Remote Control - Dynex DX-LCD42HD-09 Guia Del Usuario

8

Remote control

# Button
1
(Power)
2 ZOOM
3 INPUT
4 COMP
5 HDMI
6 Numbers
7 RECALL
8 VOL+/VOL–
9 MUTE
10 GUIDE
Description
Press to turn on your TV. Press
again to put your TV in Standby
mode.
Press to select the aspect ratio. You
can select Normal, Wide, Zoom, or
Cinema. For more information, see
"Selecting the aspect ratio" on
page 17.
Press to open the INPUT SOURCE
menu, then press or to select
the video input source. You can
select TV, AV, S-Video,
Component1, Component2,
HDMI1, HDMI2, or VGA.
Press once to select the device
connected to the COMPONENT1
jacks. Press twice to select the
device connected to the
COMPONENT2 jacks.
Press once to select the device
connected the HDMI1 jack. Press
twice to select the device
connected to the HDMI2 jack.
Press to enter channel numbers or
the parental control password.
Press to go to the last viewed
channel.
Press to increase or decrease the
volume.
Press to turn off the sound. Press
again to turn on the sound.
Press to open the DTV program
guide (if available). For more
information, see "Displaying the
DTV program guide" on page 21.
# Button
11
12 ENTER
13 MENU
14 SLEEP
15 MTS/SAP
16 CCD
17 CH.LIST
18 TV
19 VIDEO
20
21 CH+/CH–
22 FAVORITE
23 DISPLAY
24 EXIT
25 PICTURE
26 AUDIO
TV components
Description
Press to navigate in on-screen
menus.
Press to confirm selections in an
on-screen menu or to open a
submenu.
Press to open the on-screen menu.
Press to set the sleep timer. For
more information, see "Setting the
sleep timer" on page 17.
Press to select the audio mode. For
analog channels, you can select
STEREO, SAP (secondary audio
program), or MONO.
For digital channels, you can select
the audio track (if more than one
track is available). For more
information, see "Selecting the
audio mode" on page 17.
Press to turn closed captioning on
or off. For more information, see
"Turning closed captioning on or
off" on page 18 or "Selecting the
closed captioning mode" on
page 18.
Press to open the channel list. For
more information, see "Changing
channels" on page 15.
Press to watch TV channels.
Press once to select a device
connected to the AV IN jacks. Press
twice to select a device connected
to the S-VIDEO jack. For more
information, see "Selecting the
video input source" on page 13.
Press to select a digital
sub-channel. For more information,
see "Changing channels" on
page 15.
Press to go to the next or previous
channel in the channel list. For
more information, see "Changing
channels" on page 15.
Press to display the favorite
channel list. For more information,
see "Setting up the favorite channel
list" on page 19.
Press to display the information
banner. For more information, see
"Displaying the information
banner" on page 20.
Press to close the on-screen menu.
Press to select the picture mode.
You can select Standard, Dynamic,
Soft, or Personal. For more
information, see "Adjusting the
picture" on page 15.
Press to select the sound mode.
You can select Standard, Music,
Movie, or Personal. For more
information, see "Adjusting the
sound" on page 16.