Shear Cleaning; Tool Storing And Battery Maintenance; Special Maintenance; In General - CAMPAGNOLA Cobra V.Evo Manual De Uso Y Mantenimiento

WARNING!
Before re-assembling the blade group, grease the pin (25) and the washers (31).
6.1.6

Shear cleaning

Clean the shear at least once a week carrying out the following operations:
- Remove the front cover for the blades replacement.
- Remove any dirt by means of a brush and a dry cloth. Do not use any liquid for the cleaning operations.
- Lubricate the moving parts by means of spray grease.
- Re-assemble the front cover
The wood shavings of the cutting operations get mixed with the lubricant in the tool and create a sort of abrasive paste which
decreases the life span of the parts subject to wear-and-tear.
6.1.7

Tool storing and battery maintenance

Before storing the tool 3for a period of time the following operations are necessary:
•
Perform a complete battery (1) recharge cycle..
•
Every 180 days repeat a complete battery (1) recharge cycle.
•
During the storing period keep the tool in a dry place into its case.
WARNING!
If the battery (1) is not completely recharged every 180 days, as duly indicated in par. 6.1.6, it will irreparably get
damaged.

6.2 Special maintenance

WARNING!
•
Before any maintenance operations disconnect the tool from the cable (12) of the battery (1).
•
Any maintenance operations which have not been dealt with in this manual shall be carried out by an Authorized
Service Point of CAMPAGNOLA S.r.l.
•
These operations shall be carried out keeping the shear clamped in a vice and wearing heavy-duty protective
gloves.
Special maintenance operations shall be carried out by qualified mechanics or electricians .
6.2.1

In general

Before any maintenance operations:
•
Wear heavy-duty protective gloves.
•
Switch the battery (1) off.
•
Disconnect the battery cable (12).
•
Clamp the tool in a vice.

6.3 Periodic maintenance schedule

Maintenance
Registrazione della lama di
taglio (17)
Affilatura della lama
taglio (17)
Sostituzione della lama di
taglio (17)
Tagliando di revisione
generale presso Centro
Assistenza Autorizzato
Campagnola
Lubrificazione delle lame
(19) e del perno (25)
Ricarica di mantenimento
della batteria (1)
Campagnola Srl – USE AND MAINTENANCE MANUAL – Translation of the original Instructions
Ver.1.0 - Rev.: 01, Data: 21/01/2016 Mod. FOEL.600/601/602 - POWE.0200
After the Every
first work day
hour
X X
di
X X
X
Every 200,000 Every 400,000
cuts (about 100 cuts (or each
hours) year)
X
At the end of
each work
season
X
X
X
Every 180
days
X
Pag.39