Stanley STGS7115 Manual De Instrucciones página 23

MAINTENANCE
Your STANLEY power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Warning! To minimize the danger of serious
personal injury, please switch off the tool power and
disconnect all plugs before adjusting or removing/
installing any accessory. Before reassembling the tool,
press and release the trigger switch to make sure the tool
is already switched off.
LUBRICATION
This power tool does not require separate lubrication.
CLEANING
Warning! Once visible dust accumulates on the
ventilation ducts and the surrounding, immediately use dry
air to blow away dust and grit out of the interior of the
housing. You need to wear approved eye and facial
protective gear when performing this process.
Warning! Never use solvents or harsh chemicals to
clean non-metal parts of the tool. These chemicals may
weaken the material of the parts. Use only mild soap and
damp cloth to clean the tool. Never let any liquid get inside
the tool; never immerse any part of the tool into liquid.
¡Important! To ensure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment (other
than those listed in thismanual) should be performed by
authorized service centers or other qualified organizations,
always-using identicalreplacement parts. Unit contains no
user serviceable parts inside.
ACCESSORIES
The performance of any power tool is dependent upon the
accessory used. STANLEY accessories are engineered
to high quality standards and are designed to enhance
the performance of power tool. By using STANLEY
accessories will ensure that you get the very best from
your STANLEY tool. STANLEY offers a large selection
of accessories available at our local dealer or authorized
service center at extracost.
REMARKS
f STANLEY's policy is one of continuous improvement
to our products and, as such, we reserve the right to
change product specifications without prior notice.
f Standard equipment and accessories may vary by country.
f Product specifications may differ by country.
f Complete product range may not be available in all
countries. Contact your local STANLEY dealers for
range availability.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Stnley product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
STANELY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers
with efficient and reliable power tool service. For more
information about our authorized service centers and
if you need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY location nearest
you.
SPECIFICATIONS
Power input
No-load speed
Wheel diameter
Grindig wheels thickness
Type of wheel
Spindle diameter
Weight
ENGLISH • 23
STGS7115
710W
11000/min (rpm)
115mm
2.1kg
6mm
27
M14