Beta 1760PA/AC-DC Manual Del Usuario página 30

DANGER
• Never use the meter to measure voltages on a circuit above the maximum allowable input value
on any function.
• Do not exceed the maximum allowable input of any measurement range.
• Never touch exposed wiring, connections or any live circuit when attempting to take measu-
rements.
• Do not attempt to make measurements in flammable gaseous areas. fumes, vapor or dust. The
use of the instrument in these areas may cause sparking , which can lead to an explosion.
• Do not attempt to use the instrument if its surface or your hand is wet
• Never open the battery compartment cover when making measurements.
wARNING
• Always inspect the meter and test leads for any signs of damage or abnormality before use. If
the meter or its accessories have any structural defects such as broken test leads, cracked cases,
exposed metal parts or the display is not reading, do not attempt to make measurements.
• Do not turn the function switch whilst test leads are connected to the meter.
• Do not install substitute parts or make modifications to the meter. Return the meter to your
distributor for repair or re-calibration.
• Ensure the meter Is switch off before opening the battery cover when replacing the battery.
• Never replace a battery if the surface of the meter is wet or moist.
30