Dc Voltage Measurement - Beta 1760PA/AC-DC Manual Del Usuario

• The meter is set to default to "Auto Range" mode
• Pressing the "PEAK" hold button will allow the user to record the peak maximum and mini-
mum readings on the AC volt range. See page 47 for further instructions for "PEAK" Hold
function.

DC vOLTAGE MEASUREMENT

1 Set the function switch to [ v
position. The meter automatically defaults to
DC Volts
2 Insert the red test lead into the "V Ω TEMP HZ'
input terminal and the black lead to the "COM"
terminal.
3 Connect the other end of the test leads to the
circuit under test.
4 Read the display. If a "-" sign is displayed, the red
lead is the negative potential.
Example of DC voltage measurement
Hz ] range
39