Capacitance Measurement - Beta 1760PA/AC-DC Manual Del Usuario

CAPACITANCE MEASUREMENT

1 Set the function switch to [CAP] range position.
2 Insert the red test lead into the [V Ω TEMP HZ] input terminal and the black lead to the
[COM] terminal.
3 Connect the other end of the test leads to the circuit or component under test. Take the reading
on the display.
Note:
• In Capacitance range the meter is Auto Ranging only.
• A CAUTION to avoid damage to the meter or the equi-
pment under test, remove all power from the circuit and
discharge all capacitors before measuring capacitance.
• Large value capacitors should be discharged through an
appropriate resistance load. Use the DC Voltage function
to confirm that the capacitor is discharged.
Measure the capacity of a capacitor
42