Stanley BOSTITCH BT1855 Especificacion Técnicas página 9

CONTACT ACTUATION MODE
© Stanley Bostitch
The common operating procedure on "Contact Actuation Mode" or "Bump Mode" tools is for the operator to
actuate the safety yoke while keeping the trigger pulled, thus driving a fastener each time the work is contacted.
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
This will allow rapid fastener placement on many jobs, such as sheathing, decking and pallet assembly. All
compliance for the products.
pneumatic tools are subject to recoil when driving fasteners. The tool may bounce, releasing the safety yoke and
if unintentionally allowed to re-contact the work surface with the trigger still actuated (finger still holding the
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en trigger pulled) an unwanted second fastener will be driven.
rien que les produits soient conformes aux normes CE.
Warning: Tools must NOT be used in Contact Actuation Mode where changing from one working
position to another involves the use of ladders, stairs or similar structures such as roofs
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
die CE-Richtlinien für Produkte.
SELECTING THE ACTUATION MODE (Fig 14-15):
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
To ensure safety, the user should lock the trigger (see Trigger Lockout Control above) before changing the trigger
zeggen dat de producten voldoen aan de CE-vereisten.
system. To change the actuation mode, rotate the switch in the counterclockwise direction. The switch will lock
automatically when the indicating arrow is pointing down to the 3 nail icon stamped into the tool frame (Contact
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
Actuation Mode) or to a single nail icon stamped in the tool frame (Sequential Actuation Mode). Unlock the trigger
produkterne.
to resume tool operation.
UTILITY HOOK INSTALLATION (Fig 16-18):
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
yhdenmukaisuutta.
These tools include an additional utility hook suitable for storage and temporary hanging of the tool.
Warning: Always disconnect tool from air supply before making adjustments or before attempting any part
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα αντίγραφα του παρόντος
assembly or disassembly.
εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
1. Make sure sequential actuation mode is selected (See Actuation Mode above)
2. Depress the utility hook release button on the hook body (Fig 16)
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
3. Slide the utility hook into the hook attachment slot. (Fig 17)
conformità CE per i relativi prodotti.
4. Release the utility hook release button and check to ensure that the hook is locked in position. (Fig 18)
m WARNING! Never use the utility hook with the contact actuation mode.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE-
merking for produktet.
HEX WRENCH STORAGE - (Fig 19)
A hex wrench for servicing the nailer is stored within the belt hook.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
conformidade com a CE para os produtos.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem jelenti
a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.