Troubleshooting - Project Source H90-K51D-PS-BN Manual De Instrucciones

Ocultar thumbs Ver también para H90-K51D-PS-BN:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

PROBLEM
Leaks underneath
handle.
Water does not
completely shut off.
Improper water pattern.
Faucet leaks around
aerator.
LIMITED LIFETIME WARRANTY
The distributor warrants to the original purchaser of this product to be free from defects in material and workmanship under
normal use in residential applications. At its option, the Company will provide repair parts or replace defective product when
the product is used in accordance with the manufacturer's specifications.
The distributor provides a limited 5-year warranty on the finish of this product to the original purchaser. At its option, the
distributor will provide repair parts or replace defective product when the product is used in accordance with the manufacturer's
specifications. Use of mild abrasive, abrasive or chemical cleaners may damage the finish of the product. We recommend
cleaning your faucet with a soft cloth, moistened with water. Damage resulting from the use of abrasive or chemical cleaners
SHALL VOID THIS WARRANTY.
This warranty is not applicable to any products or parts of products where damage is caused by use of non-genuine parts; is
due to installation error, product misuse, negligence or faulty maintenance; or where the product is not installed according to
local building codes.
This warranty excludes labor charges or damage incurred during installation, repair or replacement, and any indirect, incidental
or consequential damages, losses, injury or costs of any nature. This warranty is in lieu of and excludes all other warranties,
conditions and guarantees, whether expressed or implied, including without restriction those of merchantability or fitness
of use.
Liability under this warranty will not exceed the purchase price for the product claimed to be defective by the original consumer
purchaser. Some states or provinces do not allow the exclusion or limitation of consequential damages so the above limitations
or exclusions may not apply. This warranty gives you specific legal rights and you may also have other rights which vary
from state to state, or province to province.
Inquiries regarding warranty claims can be directed to 1-866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Friday.
POSSIBLE CAUSE
Bonnet has come loose or O-ring on
cartridge is dirty or twisted.
Rubber valve seat is dirty, stuck, or
broken.
Aerator is dirty or small parts inside
the aerator are improperly installed.
The aerator is dirty or small parts
inside the aerator are not properly
installed.
SOLUTION
1. Move the handle to the off position. Unscrew the
handle screw and remove the handle.
2. Tighten the bonnet by turning it clockwise. Move the
cartridge stem to the on position. The leak should
stop draining out from around the cartridge stem.
3. If the leak does not stop, shut off the water supply.
Remove the bonnet by turning it counterclockwise. Lift
out the cartridge valve. Inspect the blue conjoined
o-rings under the cartridge and remove any debris. If
the o-rings are twisted, straighten them out. If they are
damaged or leak does not stop replace the cartridge
by calling Customer Service.
4. Position the cartridge back into the faucet body. Make
sure the two locating pins under the cartridge fit into
the two locating holes on the faucet body. Tightly
screw bonnet onto the faucet body.
5. Reinstall the handle.
Call Customer Service at 1-866-389-8827 for a
replacement cartridge.
1. Remove the aerator from the spout end by turning
it counter-clockwise.
2. Gently flush the small parts inside the aerator to
clear away any debris.
3. Reinstall the small parts Metal screens must be flat
and plastic supporter must be straight.
4. Screw the aerator onto the spout end and tighten.
1. Remove the aerator from the spout end by turning it
clockwise.
2. Gently flush the small parts inside the aerator to
clear away any debris.
3. Reinstall the small parts as shown in the exploded
diagram. Metal screens must be flat and plastic
supporter must be straight.
4. Screw the aerator onto the spout end and tighten.
6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1452262

Tabla de contenido