Installation Instructions - Project Source H90-K51D-PS-BN Manual De Instrucciones

INSTALLATION INSTRUCTIONS

1.
Turn off water at the supply valve at the main water supply, disconnect
the supply lines, and remove old faucet body.
Clean and dry surface area where new faucet will be mounted.
2.
Before installation, unscrew the lock nut (AA) and remove the metal washer
(BB).
3.
Install faucet with attached flange (1). Insert the faucet body assembly (A)
through the hole in the sink (2).
4.
Install the metal washer (BB) onto the threaded shank (1). Thread the
lock nut (AA) onto the shank (1). Secure the lock nut (AA) into position
by tightening the hex bolts (CC). Do not overtighten.
Hardware Used
BB Metal washer
AA Lock nut
CC Hex bolt
x 1
x 1
x 2
4
1
2
BB
AA
3
4
1
BB
AA
CC
A
1
2