Fontanot genius_q 010 Instrucciones Para El Ensamblaje página 48

EN
product identification data
GENIUS 030 - 040 Q (square)
trade name:
type: spiral staircase
STRUCTURE
description
composed of metal or wooden spacers (1), plastic spacers (2) and washers (3) stacked
and packed on the central pole (4)
materials
spacers: Fe 370 / beech / ash / oak
washers and plastic spacers: polycarbonate
pole: zinc coated Fe 370
finishing
iron spacers: epoxy powder coated in furnace
wooden spacers: water-based colouring and UV painting
TREADS
description
wooden circular or fan-shaped treads (5) stacked on the central pole (4)
materials
beech / ash/ oak
finishing
water-based colouring and UV painting
RAILINGS
Genius 030 description
composed of metal vertical balusters (8) fixed to treads (5) and of a wooden handrail (7)
Genius 040 description
composed of metal vertical balusters (6) fixed to the treads (5) of a stainless steel cable
and of a wooden handrail (7)
materials
balusters (6): aluminium
balusters (8): Fe 370
handrail: beech / ash / oak
cable: stainless steel
fixings (9): nylon
fixings (10): aluminium / zamak
finishing
balusters (8) and fixings (10): epoxy powder coated in furnace
wooden handrail: water-based colouring and UV painting
OBLIGATORY CLEANING AND MAINTENANCE
Clean the treads as soon as dirt spots and dust deposits appear and at least every 6 months using a soft cloth
moistened with water and specifi c non-abrasive and non-aggressive detergents. NEVER use abrasive scourers.
After cleaning, thoroughly dry the surfaces with a microfibre cloth to remove the haloes that form because of the
limestone in the water.
Approximately 12 months from the date of installation, check tightness of the screws of the various components.
Should even the smallest malfunction occur, it is obligatory to immediately and professionally carry out extraordinary
maintenance.
USE PRECAUTION
Avoid any improper use that is not in accordance with the product. Possible violations or installations which don't
comply with the providers instructions can invalidate the agreed product conformities.
48 - Genius 030 - 040 Q