Installing (Or Replacing) The Battery And Wireless Adapter - Hioki FT6380-50 Manual De Instrucciones

Installing (or Replacing) the Battery and Wireless
Adapter
Before using the instrument for the first time, install two LR6
Alkaline batteries.(p.25) Verify that there is sufficient battery
power remaining before measurement. If there is insufficient bat-
tery power remaining, replace the batteries.
Battery Status Indicator
This indicator is displayed at the top right corner.?
When new alkaline batteries have been installed
When 2/3 of the battery power remains
When 1/3 of the battery power remains
No battery power remains. Replace with new batteries.
When the Z3210 Wireless Adapter (option) is installed, the wire-
less communication function can be used.(p.46)
• To avoid electric shock, disconnect the clamp from the
measuring object before removing the battery cover.
• After replacing the batteries or after installing or remov-
ing the Z3210, install the battery cover and tighten the
screws before use.
• Battery may explode if mistreated. Do not short- circuit,
recharge, disassemble or dispose of in fire.
• Handle and dispose of batteries in accordance with local
regulations
• To prevent instrument damage or an electric shock, use
only the screws that are originally installed for securing
the battery cover in place. If you have lost a screw or find
that a screw is damaged, please contact your authorized
Hioki distributor or reseller.
2.2 Preparing for Measurement
HIOKI FT6380B983-00
23