Electrical Connection - Woods MDK21 Manual De Instrucciones

be unstable and cause excessive
vibration and that water will be
released

Electrical connection

WARNING
Risk of fire and electrical shock.
The appliance must be
connected to a grounded
outlet.
Make sure that the electrical
information on the rating plate
agrees with the power supply. If
not, contact an electrician.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters
and extension cables.
Make sure not to cause damage
to the electrical components
(e.g. mains plug, mains cable).
Contact the Authorised
Service Centre or an electrician
to change the electrical
components.
The mains cable must stay below
the level of the mains plug.
Connect the mains plug to the
mains socket only at the end of
the installation.
Make sure that there is access
to the mains plug after the
installation.
Do not pull the mains cable to
disconnect the appliance. Always
pull at the mains plug.
Use
WARNING
Risk of injury, burns, electrical
shock or fire.
Do not change the specification
of this appliance. Be careful
not to cause damage to the
refrigerant circuit. It contains
propane (R290), a natural
gas with a high level of
environmental compatibility.
This gas is flammable.
If damage occurs to the
refrigerant circuit, make sure that
there are no flames and sources
of ignition in the room. Ventilate
the room.
Do not put flammable products
or items that are wet with
flammable products near or on
the appliance.
Disposal
WARNING
Risk of injury.
Disconnect the appliance from
the mains supply.
Cut off the mains cable and
discard it.
The refrigerant circuit of this
appliance is ozone-friendly.
Contact your municipal authority
for information on how to
discard the appliance correctly.
Do not cause damage to the
part of the cooling unit that is
near the heat exchanger. Always
see to that the appliance is kept
clean. Do not cover the unit.
Operating Instructions
GB
5