Display Indicators - auto XS CPL-2054U Manual Del Usuario

USA
Operation

Display indicators

Symbol
Motorcycle charging pro-
7
gram is shown.
Car charging program
shown.
Cold charging program
is shown.
6 V charging program
shown.
The bars for the battery
11
charge level
tially full and the frame is
blinking.
The bars for the battery
charge level are full fill
and the frame is displayed
continuously.
Power supply indicator
flashes in green, the
1
display is blinking.
Power supply indicator is
permanently illuminated in
green.
The error display
up in red.
Standby mode
Voltage indicator
plays a value.
14
customer-service@wk-usa.com
Level
The motorcycle charging program for 12 V bat-
teries with 1.2 Ah – 14 Ah is selected.
8
The car charging program for 12 V batteries
is
with 14 Ah – 120 Ah is selected.
9
The charging program for 12 V batteries with
14 Ah – 120 Ah is selected.
10
The 6 V charging program for 6 V batteries
is
with 1.2 Ah – 14 Ah is selected.
are par-
The battery is charging.
The battery is fully charged.
12
The charger is connected to the grid.
The battery terminal clamps
not connected or are not correctly connected.
The charger is connected to the grid.
The battery terminal clamps are connected.
The battery terminal clamps are incorrectly
connected (reverse polarity).
13
lights A short circuit occurred. The charger will
switch to standby mode
The charger is overheated. It switches to
standby mode.
14
is shown. The charger is in standby mode.
15
The voltage indicator displays the current
dis-
voltage for the connected battery.
4 5
and are
14
.
AFTER SALES SUPPORT
1 888 367 7373
USA