Skip Mode (B022-004-R Only) - Tripp-Lite B022-002-KT-R Manual De Usuario

5. Operation

5.4 Skip Mode (B022-004-R only)

This feature allows you to skip from the currently active Port to the
Previous or Next one with a single keystroke. In contrast to Auto Scan
Mode (which switches Ports at a fixed interval), you can maintain
activation on a particular port for as long or as little as you like.
To activate Skip Mode:
1) Press and hold down the [
2) Press
Note: The [Asterisk] or [Minus] key must be released within one half
second, otherwise Hotkey activation is canceled, and it has no effect.
The Caps Lock and Scroll Lock LEDs on the keyboard will flash in
succession. They stop flashing and revert to normal status when you
exit Hotkey Mode.
3) Release the [
4) Press
(3 to 2; 2 to 1, etc.).
5) Press
to 2; 2 to 3, etc.).
Note: Skip Mode remains in effect until you exit it. You can use [ ]
and [ ] as often as you like. Ordinary keyboard and mouse functions
are suspended— only [ ] and [ ] can be input. You must exit Skip
Mode in order to regain normal control of the console.
6) Pressing
1003195 93-2181.indb 8
( continued )
and release the [Asterisk] key or the [Minus] key
Num Lock] key.
[ ] to skip from the current port to the port that comes before it
[ ] to skip from the current port to the port that comes after it (1
[Esc] or [Spacebar] exits both Skip Mode and Hotkey Mode.
Num Lock] key.
8
4/23/2010 2:24:24 P