Nilox FOOLISH Manual De Usuario página 110

format it on FOOLISH before any operation for normal usage.
Keep the "SHUTTER" pressed until you see "
twice in order to enter the menu of Setting Parameters: the screen shows "
RECORD key in order to set the parameters: the screen shows "
the "SHUTTER" seven times until you see the word
Press "RECORD" and select selezionare "
"RECORD" and confirm the choice of formatting the Micro SD: the screen will show "
pressing the "SHUTTER" to exit and go back to the "Preview". You have formatted the Micro SD in this
way.
Note:
Please confirm whether files in internal memory of FOOLISH and in Micro SD card are needed before
operating ;
(3) Set the date/time
With the camera on, keep the SHUTTER pressed until you see
the SHUTTER twice to enter the setting parameters: the screen will show the word "
"RECORD" to enter the under menu of the setting parameters and the screen will show the word
" ", at this point press again the SHUTTER eleven times until you see
menu date/time
Press now "RECORD" and you will see "
will see number from 00 to 99. Press the "SHUTTER" and choose the correct year, then push again
"RECORD" to confirm and go back to previous interface. Press the "SHUTTER" to enter the settings
of month, day, hour, minute and second. Use the same steps for month, day, hour, minute and second as
the ones used for setting the year. The respective symbols are the ones here below:
This is the symbol for the month, press "RECORD" and the screen will show numbers from 01 to 12, then press the "SHUTTER" for
selecting the correct month
This is the symbol for the days, press "RECORD" and the screen will show numbers from 01 to 31, then press the "SHUTTER" for
selecting the correct day
This is the symbol for the hour, press "RECORD" and the screen will show numbers from 00 to 23, then press the "SHUTTER" for
selecting the correct hour time.
This is the symbol for the minutes, press "RECORD" and the screen will show numbers from 00 to 59, then press the "SHUTTER" for
selecting the correct minute time.
This is the symbol for the seconds, press "RECORD" and the screen will show numbers from 00 to 59, then press the "SHUTTER" for
selecting the correct minute time
At the end of all the operations above, press the "SHUTTER" and the screen will show the message
" ". Press "RECORD" if you want to confirm and go back to the previous interface.
" on the screen, then press the "SHUTTER" again
(you enter in this way the format options).
" , or push "SHUTTER" to select
" (year) on the screen. Press "RECORD" again and you
~ 8 ~
". Press the
"; at this point keep on pressing
". Keep on
on the screen, then press again
: you are now in the
. Again
". Press