Nilox FOOLISH Manual De Usuario página 114

Note: The current segment file is determined by the file size set, but not determined by the true time,
that is to say, the file will be segmented more than 15/30 minutes at a dark environment.
d. Auto standby: Select the auto standby time of 0, 2 minutes, 5 minutes or 10 minutes. In case of
no any mission and operation after selecting, the system will start timing and FOOLISH will turn
off input and output to enter the standby mode at the end of the time set. If there is any operation
in timing, the system will re-time. If the video recording or shutter is operated in the standby
process, FOOLISH will be waked up. The default standby time is 5 minutes when selecting to
restore the factory default;
e. TV output format: NTSC or PAL; the video format outputted to TV can be selected. If the
selected format is changed, please unplug the AV cable and then reinsert it to update the
parameters;
f. Video/Photo deleting: the last video recording/photo file can be deleted.
g. Confirming that all the recorded files are not to be kept in memory, the whole content can be
deleted formatting the memory:
If no memory card is inserted, the device memory will be formatted. If a card is inserted, the system
will format the card, and not the device memory:
h. Light source frequency: Select the light source frequency 50Hz or 60Hz, depending on local
grid frequency, in order to avoid the screen flickering in preview mode or in video recording.
i. Date/Time: Time can be adjusted and changed. It will be displayed on the bottom right corner of
the video file or photo file when recording or shooting;
Keep the SHUTTER pressed 3 or 4 seconds to enter the interface of video recording settings and you
will see " " on the screen; press the SHUTTER again more times until you see "
display. Press "RECORD" and enter the menu:
Symbols Operations
Press the
"SHUTTER" to
roll by.
"RECORD" to
enter
Press the
"SHUTTER" to
roll by.
"RECORD" to
enter
Press the
"SHUTTER" to
roll by.
"RECORD" to
enter
Press the
"SHUTTER" to
roll by.
Sub
Menu
Symbols Descriptions
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
t2 T2
~ 12 ~
Operative Instructions
Press the SHUTTER in order to select the
available options and press "RECORD" to
confirm and go back to interface "
the SHUTTER again and go back
Press the SHUTTER in order to select the
available options and press "RECORD" to
confirm and go back to interface "
the SHUTTER again and go back
Press the SHUTTER in order to select the
available options and press "RECORD" to
confirm and go back to interface "
the SHUTTER again and go back
Press the SHUTTER in order to select the
available options and press "RECORD" to
" on the
". Press
". Press
". Press