Symbols
Operations
Press the
"SHUTTER"
to roll by.
"RECORD"
to enter
Video image
resolution
Press the
"SHUTTER"
to roll by.
"RECORD"
to enter
Laser
synchronous
Press the
"SHUTTER"
to roll by.
"RECORD"
to enter
Video/audio
recording
(2) Setting of photo camera parameter (see scheme below):
a.
Single shot: The shooting mode is auto set in single shoot when starting up every time; pressing
"Shutter" once you can take one photo;
b.
Triple Shot: pressing "Shutter" you can take three photos continuously;
c.
Continuous shoot: Take one photo every 2s/3s/5s/10s/20s/30s, it stops when you press the
key again or if the card is full, or the power is run out;
d.
Self shot: Select the self-timer delay time (0s, 5s or 10s);
If the "Self-timer Delay Time" has been set, but the machine is restarted without pressing "Shutter"
key, the machine will auto set the "self-timer Delay Time" at the state of 0s;
e.
Image resolution: select 3M, 5M or 8M;
Keep the SHUTTER pressed 3 or 4 seconds to enter the interface of video recording settings and you
will see "
" on the screen; press the SHUTTER again more times until you see "
Press "RECORD" and enter the menu:
Sub-menu
symbols
Description
1080P
720P
WVGA
QVGA
OFF
ON
Video
Recording
Mode
Audio
Recording
Mode
~ 10 ~
Operative instructions
Press the SHUTTER in order to select the
available options and press "RECORD" to
confirm and go back to interface "
Press the SHUTTER again and go back to
"Preview".
Press the SHUTTER in order to select the
available options and press "RECORD" to
confirm and go back to interface "
Press the SHUTTER again and go back to
"Preview".
Press the SHUTTER in order to select the
available options and press "RECORD" to
confirm and go back to interface "
";Press the SHUTTER again and go back to
"Preview". On the screen you will see the
symbol of Video recording "
recording " ".
".
".
" or audio
" on the display.