Nilox FOOLISH Manual De Usuario página 117

b. Triple Shot:
In "Preview" mode select this option and press "SHUTTER" once to shoot 3 photos. There will be a
click sound and the green indicator will twinkle once (the photo shooting icon "
segment screen will twinkle once) and it will go back to preview state.
c. Continuous shoot:
In Preview mode select this option and press "SHUTTER" once for shooting. After hearing a click –
according to the preset interval – the green indicator will twinkle once (the photo shooting icon "
on LCD segment screen will twinkle once). Press "SHUTTER" once more to exit and go back to
Preview mode.
d. Self Shot:
In Preview mode select this option and press "SHUTTER" once. After hearing a click the system is in
photo shooting mode and will shoot a photo at the end of the time set on the timer. The green
indicator will twinkle once (the photo shooting icon "
once). Then it will go back to Preview mode.
Nota:
a. If the memory space gets full, the LCD will show the symbol "
"Micro SD not enough" going back to the preview mode;
5. Voice recording
Select this option in the parameters setting interface. In Preview press "RECORD" in order to start the
voice recording. You will hear a "Click" , the green indicator twinkles slowly and recording time will be
shown on the LCD display. After the operation press "RECORD" to stop the audio recording and
you will hear a "Click". The device will go back to Preview.
6. Standby mode:
A. Non-voice control standby:
Push the VOX switch to "OFF" and turn the power switch to "ON", the system will start working and it
will enter preview state after finishing initialization. In case of no any mission and operation, the system
will auto enter standby power-saving mode at the end of the auto standby time set. Press "Record" or
"Shutter" key at this time, or remote control any key on the remote control, the system will be waked
up.
B. Voice control Standby:
Push the VOX switch to "ON" and turn the power switch to "ON", the system will start working and it
will enter preview state after finishing initialization. In case of no any mission and operation, and the
environmental voice is lower than 65dB continuously, the system will auto enter standby power-saving
mode at the end of the auto standby time set. Press "Record" or "Shutter" key at this time, or remote
control any key on the remote control, the system will be waked up. When the environmental voice is
higher than 65dB, the system will wake up and enter video recording state.
7. AV output connection:
" on LCD segment screen will twinkle
~ 15 ~
" on LCD
" and it will give the message
"