The Remote Controller To Control The Main Device - Beurer EM 70 Instrucciones De Uso

Step 4 – Starting a session only through the EM 70 UNIT
Turn on the device by press [ ] button, then you can press [+] but-
ton to start a treatment. During first use the default program is Arm/
Chronic, after a first connection with the remote controller always
the last used programm is the one which will be started from the
main unit. During the treatment, you can adjust the intensity level
through the [-] button and [+] button. If you have any discomfort
,press the [ ] button to EMERGENCY STOP the intensity output.
After the session is finished, you can press [ ] button hold for 2s to
power device off.
CAUTION
1) If the electrodes are not placed firmly on skin or the main unit has
not connected with the electrodes and when the output intensity
level has reached 1 level, the intensity will stop automatically.
2) If the stimulation levels make you feel uncomfortable, reduce the
stimulation intensity to a comfortable level and contact your med-
ical practitioner if problems persist.
3) If your pain does not improve and become sore from over-use, re-
frain from treating those areas for 2 days. If this issue reoccurs, re-
duce the treatment time and intensity settings for future treatment.
4) If you feel pain, dizziness, discomfort or nausea, call your physi-
cian or medical practitioner.
5) You should therefore take care to work with maximum intensities,
i.e., always at the limit of what you can support. Do not exceed
your comfort level.

9.4 The remote controller to control the main device

Step 1 – Turn on the main unit and remote control
Press [ ] button for 1s on the remote controller to turn it on. You will
hear a long beep.
Press [ ] button on the main unit, green LED light will light on. You
will hear a long beep.
As soon as the device has connected to the remote control, you will
hear two long beeps from the remote control.
If the connection is stopped or interrupted, you will hear three short
beeps.
Attention: icon will display if remote control has wireless connec-
tion with main unit.
NOTE
The device will work at the last treatment.
32