1
7
Fig. 5.5.1: DT-Mobil Easy
3
6
a
5
Fig. 5.5.2: Pump
b
Fig. 5.5.3: Delivery nozzle
7. Close automatic delivery nozzle g and allow to
stop dripping.
8. Switch off pump f.
9. Completely disconnect power source for the
pump, roll up cable and clamp terminal clamps
e to the tank's fixing cams.
10. Place hose and delivery nozzle into integrated
holder.
11. Close ball valve of the delivery line (item 3).
12. For the version with lid, fold this down and
a close both clamping locks j
or
b press on the corners of the lid until the
locking bolts n click into place.
3
6
5
c Ball valve
e Terminal
clamps
f a Pump
switch:
O = OFF
I = ON
a
Delivery
nozzle g:
a Trigger for
starting flow
b Locking
device
6. Accessories
The following accessories are available for the
DT-Mobil Easy:
6.1 Flap lid
• As lockable protection for the fittings: DT-Mobil
Easy 430 l / 460 l / 600 l: Order No. 8833
Fig. 6.1.1: Optional lid (430 l / 460 l / 600 l tank)
• As protection for the fittings:
DT-Mobil Easy 125 l / 200 l: Order No. 8963
Fig. 6.1.2: Optional lid (125 l / 200 l tank)
6.2 Flow meter, digital
K 24 (Order No. 8832)
Fig. 6.2.1:
Flow meter for
125 l / 200 l tank
GB
K 24 (Order No. 8908)
Fig. 6.2.2:
Flow meter for
430 l / 460 l / 600 l tank
23