General Informations - A.E.B. 162 Manual De Instrucciones Y Montaje

General Information
- Install in vertical position away from possible water
infiltration.
- Install away from excessive heat sources (i.e.
exhaust manifolds).
- Install away from ignition coil. Pass the wiring
Harness away from high tension wires.
- Make good electrical connections, avoiding the use
of wire splicers. Solder and properly isolate all
connections.
- Do not open the simulator box, especially while the
engine is working or while the ignition key is on the
ON position. A.E.B. is not responsible for damages
to persons or property resulting from tampering of
its devices by unauthorised personnel.
WARNING: during alternative fuel operation, the simulator
disables and simulates the injectors while the petrol electric
pump is still operative. It is important that some petrol is always
present in the tank in order to avoid overheating of the fuel
pump, which may result in irreparable damage to the fuel pump.
14
English
IS162 Rev. 200200-0