Care And Maintenance - Festo KSK Serie Operativo Instrucción

KSK-...
S
During the test run check to ensure that
the axis system can move freely.
Alignment errors, offset, tension in the
system lead to temporary or permanent
sluggishness of movement.
S
Gradually increase the speed until the
maximum positioning speed during oper-
ation is reached.
S
Conclude the test run.
7 Operation
Note
Buckled or damaged shafts and couplings will break after a certain period.
S Make sure that the components of the KSK are not damaged and that unfore-
seen fracture of the shaft cannot cause any injury to humans (by providing
e.g. a protective screen or covers).
8

Care and maintenance

S
Tighten any coupling screws which are loose.
S
Make sure the couplings are not damaged.
If a coupling is defective, x-axis 1 will drag x-axis 2 on the slide. Such drag
operation will considerably reduce the service life of the axes.
Otherwise the KSK-.. does not require any maintenance.
22
Fig. 17
Festo KSK-... 0010NH English