Folding Stroller With Icsa Attached; Removing Icsa From Stroller - Britax BOB Gear Duallie Manual De Instrucciones

FOLDING STROLLER
WITH ICSA ATTACHED
Care must be taken when
folding and unfolding the
stroller to prevent finger
entrapment or injury.
To avoid injuries, never fold
or unfold stroller with other
individuals within reach of
stroller.
1. Set Parking Brake
Set parking brake (see stroller
owner's manual if necessary).
2. Unfasten Restraint Belt
Unfasten buckle, place Restraint Belt
ends to sides of stroller seat.
3. Remove Infant Car Seat
Remove Infant Car Seat from ICSA.
4. Empty Stroller
Remove contents from low boy cargo
basket and pockets.
5. Fold Handlebar
Squeeze both handlebar release
levers simultaneously (see stroller
owner's manual if necessary).
6. Rotate Handlebar Forward
Slightly rotate handlebar towards
seat and hold in place during next
step.
7. Lift Red Frame Release Handle
Using a short, quick tug, lift red frame
release handle up. Keep tires on
ground as stroller collapses toward
front wheel (see stroller owner's
manual if necessary).
NOTE: We do not recommend
leaving stroller folded with ICSA
installed for long periods of time as
it may leave an imprint in the stroller
seat. For long term folded storage,
remove ICSA.
REMOVING ICSA
FROM STROLLER
Remove Infant Car Seat
Adapter and Restraint Belt
when not in use.
Do not place children directly
in the stroller seat with the
Infant Car Seat Adapter
installed. Remove Infant Car
Seat Adapter from stroller
prior to placing a child
directly into the stroller seat.
Failure to follow these
warnings may result in
serious injury or death.
Prepare Stroller
Set parking brake, rotate canopy
towards handlebar (see stroller
owner's manual if necessary).
15
P637400A