Installing Your Icsa; Attaching Restraint Belt - Britax BOB Gear Duallie Manual De Instrucciones

INSTRUCTIONS

INSTALLING YOUR ICSA

ATTACHING RESTRAINT BELT

Confirm each Captured
Screw is threaded fully into,
and tightened firmly against,
each Anchor Nut. Failure to
properly secure Restraint
Belt may result in accident,
injury, or death.
1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar (see stroller
owner's manual if necessary).
2. Install Restraint Belt with
Screwdriver
Using a screwdriver, thread the
Captured Screw with Buckle (Male)
completely into Anchor Nut on right
seated side of stroller Accessory
Adapter and tighten firmly.
NOTE: Thread the Captured Screw
with Buckle (Female) completely into
Anchor Nut on left side of Center
Canopy Mount (center of stroller
between seats) and tighten firmly.
Duallie
Center
Anchor
Nut
9
P637400A